单键双稳态一键启停自锁继电器模块 单片机控制
(详情提供中英文描述)
中文描述:
产品用途:
按触发按键,继电器吸合锁住,再按一次,继电器断开,也可以外接触发开关,和用低电平触发。
家用电器控制,家庭各种灯具控制,工厂设备控制,用于各种小电流控制高压大功率产品的控制。
产品特点:
1.采用双面板设计PCB;
2.采用单片机做控制,性能稳定可靠,抗干扰性强,不会误触发,性能远比CD4013;
3.具有大功率的稳压管提供充足稳定的电压,并有足够的散热孔,确保产品长时间稳定可靠工作;
4.具有防电源接反保护二极管,短时间的接反电源对产品损伤;
5.本产品有5V,12V,24V三种电源版本可选;
6.使用继电器控制负载,在250V 10A(交流)和30V 10A(直流)下的负载均可承受;
7.具有轻触开关作为产品测试,直接检验产品的稳定性;
8.触发也可以外接触发开关,产品配好有接线座与引线,更方便使用;
9.触发也可以用其它传感器模块做触发,只要是低电平触发均有效,功能有更多的扩展;
电气参数:
供电电压:5V 、12V 24V 三种可选 供电电流:大于100mA
负载:250V 10A (AC) 或30V 10A (DC)
寿命:100万次
产品使用说明:
1.按电压版本接上相应的直接电源;
2.电源按按线图要求,不可接反,虽有保护电路,但不能长时间接反;
3.产品使用稳压管(5V没有稳压管)略有发热,属正常现象,继电器长时间工作也有正常的发热现象,均属正常现象;
4.负载功率要给继电器负载留有一定的余量,应避免大功率(2000W左右)并长时间工作的环境,对产品寿命会有一定的影响。
英文描述:
Description:
Power supply to meet the scope , DC 12V,5V and 24V
The power required by the by -line diagram , is not reversed , although the protection circuit , but not for a long time reversed ;
Product regulator slight fever is a normal phenomenon , long working hours have a normal relay heat phenomena are normal ;
Relay load power to give leave some margin should avoid high-power ( about 2000W) and long working environment , there will be some impact on the life of the product .
Features :
Double panel design PCB;
Chips made ??using stable and reliable control , stable and reliable performance , strong anti-interference , not false triggering , performance is superior than the CD4013 ;
Regulator has the power to provide adequate and stable voltage , and have enough vents to ensure stable and reliable product for a long time to work ;
With anti- reverse protection diode power , reverse power for a short time without any damage to the product ;
Use SONGLE genuine relay control load in 250V 10A ( AC ) and 30V 10A ( DC ) under load can withstand ;
Has a touch switch as product testing , stability testing of products directly ;
Can also trigger an external trigger switch , the products have a connection with a good seat and lead , more convenient to use ;
Triggering sensor module can also be used to do other triggers , are valid as long as the trigger is low , there are more functional expansion;
Usage:
Press the trigger button , the relay is locked , press again , the relay off , you can also add the trigger switch , and the use of low-level trigger .
Control appliances , home of various lighting control, factory equipment control , current control for a variety of small high-voltage power control products .
Note:
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Packing Included:
1x 1 Channel Self-locking Relay Module
1x Trigger Line