1688以外のサイト、現地商品市場から弊社が独自にリサーチした商品のご提案を行います。 また、お取り組み先にご覧頂きやすいように「G/M」が付いた品番はこちらから検索ください。
1688.comは中国で生産され、流通している商品を扱うBtoB卸サイトとなります。お客様が弊社サイト内にて仕入処理をされても、日本国内の法律に則り、日本への輸入ができない商材もあり、その場合弊社でも仕入れの手配が出来ません。その際はシステム上で、自動的に注文削除となってしまう事を、恐れ入りますがご了承願います。
※単価についての注意事項: 船便の単価が適用されるには、今回の仕入において(他の商品も含めた)、消費税抜きの仕入総合計金額が20万円以上の場合となります。 総合計が20万円未満の場合はシステムで自動的にOCSの単価が適用されます。
{{ variable.name }}

SD卡模块 Micro SD卡模块 SPI接口 SD存储扩展板
(详情提供中英文描述)
中文描述:
该模块(MicroSD Card Adapter)是Micro SD卡读写模块,通过文件系统及SPI接口驱动程序,单片机系统即可完成MicroSD卡内的文件进行读写。用户可直接使用 IDE自带的SD卡程序库即可完成卡的初始化和读写
资料请复制百度网盘网址下载:http://pan.baidu.com/s/1i3A9gxv
模块特点如下:
1.支持Micro SD卡、Micro SDHC卡(高速卡)
2.板载电平转换电路,即接口电平可为5V或3.3V
3.供电电源为4.5V~5.5V,板载3.3V稳压电路
4.通信接口为标准SPI接口
5.4个M2螺丝定位孔,便于安装
英文描述:
Features:
Support Micro SD Card, Micro SDHC card (high-speed card)
The level conversion circuit board that can interface level is 5V or 3.3V
Communication interface is a standard SPI interface
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;
Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
Micro SD card connector: yes since the bomb deck for easy card insertion and removal.
Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination;
Specifications:
Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board
Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Size:45 x 28mm
Net weight:6g
Shipping content:
1x Micor SD TF Card Shield Expansion Board for Arduno
图片展示:




